Personnel Authorized To Fit New Nameplates - Endress+Hauser Promag 300 Installationsanleitung

EA01164D
2.2 Upgrading with additional I/O hardware:
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/alteration or conversion must be performed under supervision.
3

Personnel authorized to fit new nameplates

Measuring device approval
Without approval
With approval (e.g. IECEx)
1) 2 = service technician authorized by Endress+Hauser, 3 = Endress+Hauser (return device to manufacturer)
* Note: Some countries/markets require a field inspection in order to change
nameplates. Please act in accordance with national legislation.
Following alteration, back up the data via the device memory or via web server/Fieldcare.
6
Personnel authorized to carry out alterations
1, 2, 3
2, 3
Personnel authorized to apply new nameplates
2, 3
2, 3*
1)
4
1)
Endress+Hauser