Personnel Authorized To Carry Out Repairs; Safety Instructions - Endress+Hauser Prosonic Flow 500 Installationsanleitung

Order code
DK9012-***** P
• The order number of the spare part set (on the product label on the package) can differ
from the production number (on the label directly on the spare part)!
• You can find the order number of the relevant spare part set by entering the
production number of the spare part in the spare part search tool.
• We recommend that you keep the Installation Instructions and packaging together at
all times.
2

Personnel authorized to carry out repairs

Authorization to carry out repairs depends on the measuring device' s approval type. The table
below shows the authorized group of people in each case.
Whoever carries out the repairs has full responsibility to ensure that work is carried out
safely and to the required quality standard. He/she must also guarantee the safety of the
device following repair.
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/alteration must be performed under supervision.
3

Safety instructions

• Check whether the spare part matches the identification labeling on the measuring device,
as described on the cover page.
• The spare part set and the Installation Instructions are used to replace a defective unit with
a functioning unit of the same type.
Only use original parts from Endress+Hauser.
• Comply with national regulations regarding mounting, electrical installation,
commissioning, maintenance and repair.
Endress+Hauser
Original spare part set
Sensor cable set, 15m/35ft
CC
-40 to 80°C/-40 to 176°F
B
Sensor cable set, 30m/60ft
CD
-40 to 80°C/-40 to 176°F
Contents
1 × TPE sensor cable, reinforced
1 × TPE sensor cable, reinforced
Personnel authorized to perform repairs
1, 2, 3
2, 3
4
EA01370D
1)
5