Residual Heat Display; Pan Recognition; Power Boost - Teka .GKST 58 Serie Gebrauchs- Und Montageanweisung

Residual heat display

The residual heat display is by means of an illuminated "H" on the appropriate cooking level display

Pan recognition

An advantage of the induction heating method is the pan recognition. If there is no pan or a too small pan placed
on the hotplates, no energy ist transmitted. If the cooking zone is switched on, the pan symbol "u" flashes in the
"
cooking level display . During the next 10 minutes the pan recognition will identify a pan that has been placed
and it will switch on the selected level. In the same way, the power supply to the cooking zone is interrupted, if the
pan is removed from the cooking zone. If the pots and pans placed on the cooking zone are of smaller dimension,
and the pan recognition still switches on, then the power supply will take place with less power.

Power boost

For the induction cooking zone marked by a P an additional power boost can be activated for a fast parboiling
boost. To switch on and off the power key
activated and switched on. By activating this power mode, the power supply for the cooking zone will be increased
for the time of max. 10 minutes. This will be indicated by a "P" in the cooking level display. The power supply for
the corresponding induction cooking zone is decreased for this time. This will be indicated by continuous changing
in the display between selected cooking range and decreased cooking range. After switching back from the power
mode, the corresponding cooking zone provides the full power.
Timer
The timer can be used to automatically switch off a cooking zone after a pre-set time of between 1 and 99 minutes.
The required cooking zone must be activated, stand-by dot
means of the minus or plus keys
required cooking time between 1 and 99 minutes by means of the minus or plus keys
the selected cooking zone lights up.
The selected cooking time can be altered at any time. Activate the relevant cooking zone, press timer key
change the cooking time by means of the Minus or Plus keys
When the pre-set cooking time has finished, the cooking zone switches off automatically and an acoustic signal
sounds for 30 seconds. This can be switched off by pressing the timer key
If you want to switch the timer off beforehand, press cooking zone key
now be used to set the timer
the plus keys + .
The timer can also be used as an egg timer when none of the cooking zones are activated. In this case, no cooking
zone should be activated when the timer
14
must be activated. To do this, the induction cooking zone must be
/ . Then press timer key
to "00", or alternatively this can be done by simultaneously pressing the minus and

is being set (the cooking zone stand-by dot
#
lights up. Select a cooking level from 1 to 9 by

. The timer display
/ .

.
!
and timer key
"
.
shows "00". Select the
/ . The control lamp of

and

. The minus key can
#
does not light up).
224245