Preparation For Assembly; Power Supply - HANSGROHE PHARO Duschtempel 100 Montageanleitung

P r e p a r a t i o n f o r a s s e m b l y
Before mounting the Shower Temple tile the room. Position the
shower tray below the tiles, do not tile the rows where the
Shower Temple tray is positioned.
Before you can proceed, the water supply and the waste water
outlet have to be installed. This should be carried out by a
plumber, in accordance with the local requirements.
Two flexible hoses and two wall outlet elbows (external
threads) are supplied to connect the water.
The over head shower and the body showers are supplied
through the installation unit. The best place for the supply
connections is at the corner behind the profile
Hollow pipe

Power supply

230 V~ 50/60 Hz
Hollow pipe for power supply:
Electronic EL40 interior-diametre 35*
Manual ML40 interior-diametre 25*
Alternatively left or right at the corner
* recommended diameter to prevent stoppage of the
connecting cable in the hollow pipe.
Concealed water supply
Alternatively left or right at the corner
Manual DN15 1/2"
Electronic DN15 1/2"
The shaded area marks the best place for the
waste outlet DN50
Please stick the enclosed anti-slip sticker in the
shower tray! The surface needs to be clean, dry
and free from grease.
37