HANSGROHE PHARO Duschtempel 100 Montageanleitung Seite 41

M o u n t i n g r o o f , i n s t a l l a t i o n u n i t a n d c o l u m n s
5
4
6
9
10
11
1
2
3
7
8
Erecting columns
Look out for the door hinge, the right-hand hinge is shown.
Uncover shower tray before stepping on.
The columns are sealed to the shower tray by a silicon, free
from acetic acid sealing element.
Place columns onto the shower tray, the upper cut out faces the
shower tray. Secure columns with slide disc (1) washer (2) and
nut (3). Tighten nut by hand.
Mounting support frame
Lay support frame (4) onto the columns and wall holder.
Lay decor ring (8) onto columns.
Secure support frame onto columns with support ring (7),
washer (6) and hexagonal head screw (5) M10x40 .
Tighten hexagonal head screw by hand.
Fit screw (11) M8x30 from the underside coming into the
wall holder. Secure support frame with nut (9) and washer
(10). Tighten nut by hand.
Align columns vertically.
Centre support frame between wall holder and columns.
Tighten nuts (3, 9) and hexagonal head screw (5).
41