HANSGROHE PHARO Duschtempel 100 Montageanleitung Seite 51

O p e r a t i n g / s e r v i c i n g E L 4 0
Closing the
program menu
(Possible at any time without
saving any changes.)
Press the >42° ( ) button
to leave the program menu.
Resetting program
values to the factory
settings
(Resets all program values to
factory settings.)
Press the >42° ( ) and
Overhead shower ( )
buttons at least 5 seconds un-
til RES appears (press the
>42° ( ) button again to
stop the reset).
Press the Mode ( ) button:
The reset is performed.
Resetting to the factory
settings for mixer tem-
perature/setting curves
(Resets all system configura-
tion values to factory settings.)
Press the >42° ( ) and
Hydromassage ( )
buttons at least 5 seconds
until trC appears (press the
>42° button again to stop
the reset).
Press the Mode ( ) button:
The reset is performed.
(EL = electronic version)
51