Waeco PerfectView CAM26W Montage- Und Bedienungsanleitung Seite 71

_RV-HD-LCD.book Seite 71 Donnerstag, 14. Dezember 2006 5:03 17
PerfectView
Selecting and installing the camera
➤ Call up the "INSTALL/AUSWAHL" menu.
✓ The following menu is shown:
INSTALL
REAR
CAM1
CAM2
You can set the following parameters:
REAR: select the desired camera as the standard camera (the standard
camera is activated when you shift into reverse gear; the other camera is
activated via the indicator)
– "CAM1": select camera 1 as the standard camera
– "CAM2": select camera 2 as the standard camera
CAM1: switch on/off the mirror function for camera 1
– "NOR": the mirror function is switched off
– "MIR": the mirror function is switched on
CAM2: switch on/off the mirror function for camera 2
– "NOR": the mirror function is switched off
– "MIR": the mirror function is switched on
➤ Select the desired function (e. g. "CAM1") by pressing the "SELECT"
button the appropriate number of times.
➤ Press the "UP" or "DOWN" button to effect the setting as described above.
Note
The distance markers are displayed in the picture, which displays
the camera whose mirror function is switched on.
When you shift into reverse gear, only the distance markers will be
displayed on the screen. All buttons are deactivated except the
"Up" and "Down" buttons, with which you can move the distance
markers.
Using the reversing video system
CAM1
MIR
NOR
71