Adjusting Air Flow Direction; Maintenance After A Long Stop Period - CLIVET MKG-V250 Installations- Und Bedienungsanleitung

5. ADJUSTING AIR FLOW DIRECTION

While the unit is in operation, you can adjust the air flow louver
to change the flow direction and naturalize the room
temperature evenly. Thus you can enjoy it more comfortably.
Adjust horizontal air
C faceplate
S faceplate
Adjust vertical air
6. MAINTENANCE
Before you clean the air conditioner, be sure the power
supply is off.
Check if the wiring is not broken off or disconnected.
Disconnect the power supply before cleaning and
maintenance. Use dry cloth to clean the unit.
Use a dry cloth to wipe the indoor unit and remote
controller.
A wet cloth may be used to clean the indoor unit if it is
very dirty.
Never use a damp cloth on the remote controller.
Do not use a chemically-treted duster for wiping or leave
such material on the unit for long.
it may damage or fade the surface of the unit.
Do not use benzine, thinner, polishing powder, or similar
solvents for cleaning.
These may cause the plastic surface to crack or deform.

Maintenance after a long stop period

Fig.5-1
C faceplate
S faceplate
CAUTION
Fig.5-2