Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PICTURE MODE
EN
Picture sequence
The Leica T can be used to take single pictures and series of
pictures.
►
Select the required setting in
Notes:
• Picture series are taken at a frequency of 5fps, provided shutter
speeds of
/
s and faster are used.
1
60
• Picture series are not possible when using the fl ash. If a fl ash
function is activated, only one picture is taken.
• If picture series mode is set and the self-timer is used at the
same time, only a single picture is taken.
• After a series of a maximum of 12 pictures, the shooting
frequency slows down slightly. This is due to the time required to
transfer the data from the buff er memory to the card / internal
memory.
• Regardless of how many pictures are taken in a series, the last
picture is always shown fi rst in review mode.
154
Distance setting
On the Leica T, the distance can be set either automatically or
manually.
Note:
When using Leica M lenses with the Leica M Adapter T available as
an accessory, only manual distance setting is possible.
Automatic distance setting / autofocus
►
Select
in
AF
If the
AF
function is assigned to the left adjusting dial, it can be
used to directly select the required option -
• The set function is displayed in the monitor.
The sharpness and thus the distance is automatically determined,
set and saved (metering memory lock) when you press the shutter
release to the pressure point.
• A successful and saved AF setting is indicated as follows:
– The color of the rectangle changes to green
– With multiple fi eld metering up to 9 green rectangles appear
– An acoustic signal is generated (if selected)
AF
or
MF
.
Werbung
Kapitel
Inhaltsverzeichnis
