Leica T Anleitung Seite 131

Inserting the battery in the charger
Removing the battery from the charger
Notes:
• The charger must be fi tted with the appropriate connector for
local power sockets.
• The charger automatically adjusts to the relevant mains voltage.
Charge status displays
The charging process is indicated by LEDs.
With USB cable (LED on camera)
– Continuous red: Charging in progress
– Continuous green: Battery fully charged
With charger (LED on charger
Fig. 9
– Flashing red: Fault, no charging
– Continuous red: Charging in progress
– Continuous green: Battery fully charged
Charge level display
Fig. 10
The charge level of the battery inserted is indicated in the monitor.
The display fl ashes if the battery only has capacity for a few more
pictures. At this point, the battery should be replaced or recharged.
Fig. 6
Fig. 7
Fig. 8
)
"Click"
Fig. 6
Fig. 8
Fig. 10
2.
1.
Fig. 7
Fig. 9
EN
127