Focusing By Touching; Multiple Field Measurement; Face Detection - Leica T Anleitung

EN

Focusing by touching

In this mode, the AF frame can be moved for every picture, without
additional settings in the menu. The metering characteristics and
metering fi eld size correspond to single fi eld metering.
► Select
► Select in the submenu
Touch AF
Moving the metering fi eld
► Press the monitor at the required position in the image fi eld
F 2.8 1/8000 ISO 12500 EV
12MP
-3 2 1 0 1 2 3+
Fig. 48a
• The AF frame 'jumps' to the selected position.
Pictures
In this case, the focusing process does not take place when the
shutter release is pressed to the pressure point but immediately
when you press the monitor.
Note:
The metering fi eld remains at the last point determined, even after
turning off the camera.
158
Fig. 48a/b
F 2.8 1/8000 ISO 12500 EV
A
INFO
8234 12MP
-3 2 1 0 1 2 3+
Fig. 48b
Multiple fi eld measurement
This metering method detects the subject using a total of 11 fi elds.
Focusing is carried out automatically based on the parts of the
subject detected at the shortest distance, thus providing maximum
reliability for snapshots. The fi elds used are indicated by AF frames.
Under normal circumstances, 9 of the 11 fi elds are used, and are
positioned in such a way as to cover most of the center of the
image.
► Select
► Select
Multi Point

Face detection

A
In this mode, the Leica T automatically detects faces in the image
and focuses on the one that is detected at the shortest distance. If
no faces are detected, multiple fi eld metering is used.
INFO
8234
► Select
► Select
Face Detection
in the submenu
in the submenu