Resetting the picture fi le numbering
The Leica T saves picture fi les with ascending numbers and stores
them in automatically created folders. The names of the picture
fi les are therefore made up of eight characters, "
camera, three fi gures for the folder, and four fi gures for the picture,
e.g. "
". You can reset this numbering at any time:
L1001234
►
Select
• A confi rmation prompt appears
►
Confi rm -
or reject -
YES
NO
When you reset the numbering, or if the current folder contains the
picture fi le number 9999, a new folder is automatically created and
the numbering starts over. Example: Last picture before reset
"
", fi rst picture afterwards "
L1009999
can use this to sort your picture fi les more clearly.
The next available number is always used as the folder number, and
a maximum of 999 folders are possible.
If the number capacity is reached at "
warning message appears in the monitor and the numbering has to
be reset.
" for the (Leica)
L
". For example, you
L1010001
", a corresponding
L9999999
Notes:
• If a memory card is inserted, the numbering is only reset on the
card; if no card is inserted the internal memory numbering.
• If the memory card used already contains a picture fi le with a
higher number than the last number assigned by the camera, the
numbers are incremented according to the numbering on the
card.
• To reset the folder number to 100, format the memory card or
the internal memory and then immediately reset the image
number. This resets the image number (to 0001).
EN
195