Kit CM44x: Deckel mit Navigator
2. Lieferumfang
Inhalt des Kits (siehe Bild 2):
1 St.
Deckel mit Navigator (ohne Elektronik)
4 St.
Deckelschraube M4
1 St.
Anleitung für das Servicekit
Bild 2: Kit "Deckel mit Navigator"
3. Austausch des Deckels
Das Kit "Deckel mit Navigator" enthält kein Dis-
playmodul. Deshalb müssen Sie das vorhandene
Displaymodul aus dem alten Deckel ausbauen
und in den neuen Deckel montieren.
1. Beim Displaytausch ist "hot plugging" erlaubt.
Sie brauchen das Gerät nicht auszuschalten.
Bild 3: Innenansicht CM44x
2. Scope of supply
Content of the kit (see figure 2):
1 pc.
Cover with knob (w/o electronics)
4 pcs.
Cover screw M4
1 pc.
Service kit instruction
3. Cover replacement
The kit "Cover with knob" contains no display
module. Therefore you have to remove the
present display module from the old cover and
mount it into the new one.
1. "Hot plugging" at display exchange is possible.
The instrument must not be switched off.
B
B
3/8
Kit CM44x: Cover with knob
Figure 2: Kit "Cover with knob"
A
Figure 3: Inside view CM44x
Endress+Hauser