Operating options
6.1.1
Display and operating elements
Display elements
11
LC display of the field transmitter (backlit, attachable in 90° stages)
Item No.
Function
1
Bar graph display
2
' C aution' symbol
3
Unit display K, °F, °C or %
4
Measured value display, digit
height 20.5 mm
5
Status and information display
6
' C onfiguration locked' symbol
7
' C ommunication' symbol
Local operation
NOTICE
‣
ESD - electrostatic discharge. Protect the terminals from electrostatic discharge. Failure
to observe this may result in destruction or malfunction of parts of the electronics.
44
50
40
60
30
70
!
20
80
K
°F
°C
%
10
90
0
100
Description
In increments of 10% with indicators for underranging and
overranging.
This is displayed when an error or warning occurs.
Unit display for the internal measured value displayed.
Displays the current measured value. In the event of an error or
warning, the corresponding diagnostics information is displayed.
Please refer to the relevant Operating Instructions for the device
for more information.
Indicates which value is currently shown on the display. Text can
be entered for every value. In the event of an error or a warning,
the sensor input that triggered the error/warning is also displayed
where applicable, e.g. SENS1
The ' c onfiguration locked' symbol appears when configuration is
locked via the hardware or software
The communication symbol appears when HART® communication
is active.
iTEMP TMT162
1
2
3
4
5
6
7
Endress+Hauser
A0034101