Product Identification; Nameplate - Endress+Hauser iTEMP TMT162 Bedienungsanleitung

iTEMP TMT162
4.
Are the technical documentation and all other necessary documents provided?
3.2

Product identification

The following options are available for identification of the device:
• Nameplate specifications
• Enter the serial number from the nameplate in the W@M Device Viewer
(www.endress.com/deviceviewer): All data relating to the device and an overview of the
Technical Documentation supplied with the device are displayed.
3.2.1

Nameplate

Is this the correct device?
Check the data on the nameplate of the device and compare them against the requirements of
the measuring point:
TMT162-SIL
1
Order Code: TMT162-
Extended order code:
Ser.No.: 0123456789
TAG No.: 0123456789ABCDEF
0123456789ABCDEF
2
11.5...40 V
4...20 mA HART
3
Ta= -50 ...+55/70/85 °C T6/T5/T4 (-40...+75 °C SIL)
Threads M20x1.5
II2D Ex tb IIIC T110°C Db
Install per XA00032R/09/a3/xx.yy
4
Do not open when energized
5
 1 Nameplate of the field transmitter
(example, Ex version)
Endress+Hauser
TMT162
Made in Germany 2017
87484 Nesselwang
IP66/67 TYPE4X Encl.
Current cosum.: 23 mA
6
Incoming acceptance and product identification
1 Order code, serial number and TAG of device
2 Power supply, degree of protection, etc.
3 Ambient temperature range
4 Approvals in hazardous area with numbers of the
relevant Ex documentation (XA...)
5 Approvals with symbols
6 Device revision and firmware version
A0034479
0
1
2
A0024858
31