Delete commands
Deleting commands for only one mode key
Open the learn mode as described in the previous
section, steps 2 to 4. Proceed as follows:
1.
Use the arrows to select
and press OK.
2.
Now select the mode key whose commands are
to be deleted.
3.
Confirm the additional
pressing OK. If this message does not appear
then the mode key does not have any
commands associated with it.
PLEASE WAIT
4.
followed by the confirmation message
The remote control returns to normal operation.
Deleting commands for all mode keys
Open the learn mode as described in the section above,
steps 2 to 4. Proceed as follows:
1.
Use the arrows
LEARN CLEAR
2.
Press OK" The
3.
Confirm once again with OK.
appears again in the display, followed by the
confirmation message
The remote control returns to normal operation.
26
the delete mode
CONFIRM CLEAR
appears again in the display,
(press twice) to select the
mode.
CONFIRM CLEAR
prompt appears.
PLEASE WAIT
SUCCESS
prompt by
SUCCESS
.
ALL
.