Select Device Code In The Display - Medion MD 82467 Bedienungsanleitung

Select device code in the display

1. Switch on the device to be controlled.
2. Keep the SETUP key pressed down for approx. 3
seconds, until
3. Press OK. The
4. Press OK. The
5. Press the required mode key (TV, VCR, DVD,
CD, ASAT, CBL, AUX, DSAT). In the display you
see the words
6. Use the arrows to select
to be programmed on this mode key. (If you
TV
select "
codes can be programmed on the TV mode key.)
Please refer to the list and table above.
7. Press OK.
codes for the device group that contains the
previously selected device type are now scanned
in order of brand name (cf. the enclosed code
list). The first entry is displayed in alphabetical
order with the first code.
8. Use the arrows to select
code is shown.
9. Use the arrows to select a device code
10. Now try the universal remote control with your device. To do this,
(depending on the device type) use the following keys POWER
0 – 9, VOL, P+/–, AV, Mute
keys.
If the device does not respond as expected, select a different code.
11. When you have found a suitable device code,
press OK to save the code.
PLEASE WAIT
followed by the confirmation message
The remote control returns to normal operation.
14
CODE SETUP
appears.
LIST CODES
menu is displayed.
MODE KEY
display appears.
DEVICE? TV
.
" it is not possible to select a device type because only TV
PLEASE WAIT
appears in the display. The
appears again in the display,
the device type
the brand name of your device. The first
for this brand name.
, Video text as well as the six playback
SUCCESS
.
,