Code Searching By Brand Name - Medion MD 82467 Bedienungsanleitung

be programmed on this mode key. (If you select "
to select a device type because only TV codes can be programmed on
the TV mode key.)
Please refer to the list and table on page 13.
8. Press OK. The
9. Perform the function test now by pressing the
or PLAY (VCR only) keys (up to 350
P+,
times) until the device changes channels,
switches off or responds accordingly.
The code search begins with the code that is currently stored. While the
search is running, the word
type) is displayed.
If you miss the code, you can go back step by step with the P– key.
10. When the device responds accordingly each time
a key is pressed, press OK to save the code. The
SUCCESS
confirmation message appears.
The remote control returns to normal operation.
When all codes for the selected device type are shown,
the following message appears:

Code searching by brand name

This function gives you the option of searching by brand name. You can find the
brand name in the code list under "Code Search by Brand Name".
1. Switch on the device to be controlled.
2. Keep the SETUP key pressed down for approx. 3
seconds, until
3. Press OK.
4. Use the arrows
BRAND CODES
the
5. Press OK. The
6. Press the required mode key (TV, VCR, DVD,
CD, ASAT, CBL, AUX, DSAT). The
display appears.
7. Use the arrows to select
to be programmed on this mode key. (If you select "
possible to select a device type, because only TV codes can be
programmed on the TV mode key.)
Please refer to the list and table on page 13.
16
SEARCH KEY
display appears.
SEARCHING
SEARCH END
CODE SETUP
appears.
LIST CODES
now appears in the display.
(press three times) to select
menu.
MODE KEY
display appears.
(along with the selected device
.
DEVICE TV
the device type
TV
" it is not possible
TV
" it is not