The display
Overview
Default readouts in the display
Standard display – time
In the standard display:
•
the active mode appears in the first column
(device type).
•
the day of the week and time appears in the
second column.
Date
Press the SETUP key briefly
•
the symbol for the activated SHIFT function
the first column;
•
the date in the second column.
Please read "Setting time and date" on page 9 for
more information on setting the time and date.
Select mode or device
Use a mode key to select the mode or the device that was programmed to this
mode key. In the display:
•
the name of the mode key appears in the first
column;
•
this device's programmed code appears in the
second column.
Please refer to "Programming device codes" on page 12 for more information
on programming the device code.
1
Press and hold the
2
Most keys can be assigned two functions (cf. Page 18). You can access the second
function by first activating the SHIFT function.
1
to show:
SETUP
key to open the CODE SETUP (see next chapter).
2
(S)
in
7