Entering the device code according to the code list
The codes of the corresponding devices can be found in the code list enclosed
with these operating instructions.
1.
Switch on the device to be controlled.
2.
Keep the SETUP key pressed down for approx. 3
seconds, until
3.
Press OK.
4.
Use the arrows to select
menu.
5.
Press OK. The
6.
Press the required mode key (TV, VCR, DVD,
CD, ASAT, CBL, AUX, DSAT). The mode key
label is displayed with the current code.
7.
Use the number keys to select the preferred code
from the code list. After you enter the fourth
digit, the confirmation message
displayed.
The remote control returns to normal operation.
If an incorrect code is entered, the error message
ERROR
appears. – The universal remote control then
switches to normal operation.
Manual code search
You can use the manual code search to find all of a device's codes, including
those that are not shown in the code list.
1.
Switch on the device to be controlled.
2.
Keep the SETUP key pressed down for approx. 3
seconds, until
3.
Press OK.
4.
Use the arrows
SEARCH CODES
5.
Press OK" The
6.
Press the required mode key (TV, VCR, DVD,
CD, ASAT, CBL, AUX, DSAT). The
display appears.
7.
Use the arrows to select
CODE SETUP
appears.
LIST CODES
now appears in the display.
MODE KEY
display appears.
CODE SETUP
appears.
LIST CODES
now appears in the display.
(press twice) to select the
menu.
MODE KEY
display appears.
ENTER CODES
the
SUCCESS
is
CODE
DEVICE TV
the device type to
15