Safety instructions
Please read these instructions carefully before operating the remote
control. Keep the instructions in a safe place for future reference or in
case you need to pass them on to someone else.
General information
•
Do not attempt to repair the remote control yourself.
•
The universal remote control contains an infrared laser class 1 diode. The
device has a safety system that prevents the emission of dangerous laser
rays escaping from the device during normal use. In order to avoid injury to
the eyes, never interfere with or damage the unit's security system.
•
Do not subject your remote control to dust, strong sunlight, moisture, high
temperatures or strong vibrations.
Battery instructions
•
Keep children away from the batteries. Seek medical attention immediately
in the event of a battery being swallowed.
•
Before inserting the batteries, check whether the contacts in the device and
batteries are clean and, if necessary, clean them.
•
Only use new batteries. Never use old and new batteries together.
•
Do not use a combination of battery types.
•
Please note the polarity (+/-) when inserting the batteries.
•
WARNING! There is a risk of explosion if batteries are incorrectly replaced.
Replace the batteries only with the same or equivalent type.
•
Never try to recharge non-rechargeable batteries. There is a risk of an
explosion!
•
Store batteries in a cool, dry location. Direct strong heat can damage the
batteries. For that reason do not expose the device to any sources of strong
heat.
•
Never short-circuit the batteries.
•
Never throw batteries into a fire.
•
If the appliance is not going to be used for long periods, remove the
batteries.
•
Immediately remove leaking batteries from the device. Clean the contacts
before inserting new batteries. There is a risk of corrosion due to battery
acid!
•
Also remove dead batteries from the device.
Cleaning
Clean the device with a dry or lightly dampened, lint free cloth. Do not use any
corrosive or aggressive cleaning products.
3