Programming Commands - Medion LIFE E74023 (MD 83709) Bedienungsanleitung

11.2. Programming commands

To programme, proceed as follows:
 Place the remote controls on a table with the infra-
red diodes facing each other at a distance of be-
tween 15 and 50 mm. The infrared diodes must be
pointing directly at each other.
 Press the Setup button for approx. 3 seconds until
CODE SET appears in the display.
 Press or , to access LEARN MODE.
 Press O K to access the learn mode.
 Press O K again to confirm.
 Now select the source key on which the device of
the original remote control was programmed.
 The prompt MODE KEY appears. Select the
mode (TV, DVB, DVD or VCR) you want to assign to
a button.
 The prompt SAVE KEY appears. Now select the
button on the universal remote control that is to
be assigned to the original remote control function
(not SETUP or MACRO).
DE
FR
EN
NL
41