Macros; Programming Macros - Medion MD 82467 Bedienungsanleitung

Macros

Using a macro, you can save a chain of commands, meaning that several
functions can be executed consecutively. You can program three macros and
store them on the number keys 1, 2 and 3.
These three number keys have the additional labels TV,
VCR, DVD, so that you can assign macros accordingly.
Each macro can include up to ten key commands. A
macro can include different devices. In this way you could, for example, switch
on the TV set, the desired channel, the video recorder and the recording
function by simply pressing the MACRO key and the selected number key 1, 2
or 3.
The Setup and MACRO keys cannot be used for a macro.
If you would like to interrupt macro programming prematurely, press SETUP.
In this case, the macro is not saved.

Programming macros

1. Keep the SETUP key pressed for approx. 3
seconds, until
2. Press SETUP briefly four more times to open the
MACRO SETUP
3. Press OK to open the
4. Confirm once again with OK.
5. Now select the number key 1, 2 or 3 where the
macro is to be saved.
6. The query
corresponds to the previously selected number
key.) Press a mode key for the device where the
command is to start.
7. The input query
step number (
out the function that you would like to save as a
macro. You can press up to 9 other keys and you
can also change devices via the mode keys.
8. When the series of steps is finished, press the
macro.
The macro is saved automatically after step 10.
SUCCESS
9. The
CODE SETUP
appears.
menu.
MACRO SET
MACRO 1 MODE?
appears. (The number
MACRO 1 KEY?
02
for the second step). Now carry
confirmation message appears.
mode.
appears with the
MACRO
key to save the
27