Yamaha YZ250LC Fahrer- Und Wartungshandbuch Seite 428

FRONT FORK
5. Install:
9 Spring guide 1
9 Locknut 2
To damper rod 3.
NOTE:
9 Install the spring guide with its smaller dia. end
a facing downward.
9 With its thread b facing upward, fully finger
tighten the locknut onto the damper rod.
6. Install:
9 Dust seal 1
9 Stopper ring 2
9 Oil seal 3
9 Oil seal washer 4
9 Slide metal 5
To inner tube 6.
NOTE:
9 Apply the fork oil on the inner tube.
9 When installing the oil seal, use vinyl seat a
with fork oil applied to protect the oil seal lip.
9 Install the oil seal with its manufacture's marks
or number facing the axle holder side.
9 Install the oil seal washer with its projections b
facing upward.
7. Install:
9 Piston metal 1
NOTE:
Install the piston metal onto the slot on inner
tube.
8. Install:
9 Outer tube 1
To inner tube 2.
5-32
CHAS