Yamaha YZ250LC Fahrer- Und Wartungshandbuch Seite 376

FRONT WHEEL AND REAR WHEEL
5. Install:
9 Wheel axle 1
NOTE:
Apply the lithium soap base grease on the wheel
axle.
6. Install:
9 Nut (wheel axle) 1
7. Tighten:
9 Bolt (axle holder) 1
NOTE:
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork several
times with the front brake applied.
8. Install:
9 Brake hose 1
To brake hose holder 2.
NOTE:
Before tightening the bolt (brake hose holder),
align the top a of the brake hose neck with the
brake hose holder bottom b. Then pass the
brake hose in front of the axle boss c and fit it
into the hose groove d so that the brake hose
does not contact the nut (wheel axle).
5-6
CHAS
105 Nm (10.5 m•kg, 75 ft•lb)
23 Nm (2.3 m•kg, 17 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)