Yamaha YZ250LC Fahrer- Und Wartungshandbuch Seite 190

REAR SHOCK ABSORBER INSPECTION
Extent of adjustment:
Maximum
Fully turned in
position
9 STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
15 clicks out
*10 clicks out
*For EUROPE
cC
Do not force the adjuster past the minimum
or maximum extent of adjustment. The ad-
juster may be damaged.
w
Always adjust each front fork to the same
setting. Uneven adjustment can cause
poor handling and loss of stability.
3. Install:
9 Rubber cap
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
9 Swingarm smooth action
Abnormal
Grease the pivoting points or repair the
pivoting points.
Damage/Oil leakage ¡ Replace.
3-29
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)
noise/Unsmooth action
¡