Yamaha YZ250LC Fahrer- Und Wartungshandbuch Seite 196

REAR SHOCK ABSORBER LOW COMPRESSION
DAMPING FORCE ADJUSTMENT
3-32
EC36c000
REAR SHOCK ABSORBER LOW
COMPRESSION DAMPING FORCE
ADJUSTMENT
1. Adjust:
9 Low compression damping force
By turning the adjuster 1.
Stiffer a a ¡
Increase the low compression
damping force. (Turn the ad-
juster 1 1 in.)
Softer b b ¡
Decrease the low compres-
sion damping force. (Turn
the adjuster 1 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
9 STANDARD POSITION:
This is the position which is back by the specif-
ic number of clicks from the fully turned-in posi-
tion. (Which align the punch mark a on the ad-
juster with the punch mark b on the high com-
pression damping adjuster.)
Standard position:
About 12 clicks out
cC
Do not force the adjuster past the mini-
mum or maximum extent of adjustment.
The adjuster may be damaged.
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)