Technical Data - Ottobock Z-Flo 476C00 Z serie Gebrauchsanweisung

3 Technical Data

3.1 Available Sizes
The seat cushion will be adapted to the correct size in accordance with the order:
Z-Flo seat cushion
� � 476C00=AC15x16
� � 476C00=AC16x16
� � 476C00=AC16x18
� � 476C00=AC16,5x16,5
� � 476C00=AC18x16
� � 476C00=AC18x16,5
� � 476C00=AC18x18
� � 476C00=AC20x18
3.2 Basic Data
7 cm
Z-Flo
Structure of the seat cushions
Foam with air chamber: polyurethane
Floam cells: Floam (mineral oil, Kraton, acrylic)
Cover: synthetic rubber; decor fabric, black
* ready-to-use state
4 Liability
The manufacturer's warranty applies only if the device has been used under the conditions and for
the purposes described. The manufacturer recommends that the device be used and maintained
according to the instructions for use.
The manufacturer is not responsible for damages caused by components and spare parts not
approved by the manufacturer. Repairs must be carried out exclusively by authorised dealers or
by the manufacturer.
5 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for medical devices. This
device has been classified as a class I device according to the classification criteria outlined in
appendix IX of the guidelines. The declaration of conformity was therefore created by O ttobock
with sole responsibility according to appendix VII of the guidelines.
Z-Flo 476C00=Z*
Dimensions
seat width x
seat depth
38x40
40x40
40x46
42x42
46x40
46x42
46x46
50x46
Seat cushion
thickness*
1.6 kg
(with 40 x 40 cm/
6 x 16 inches)
Weight* Permissible
patient weight
125 kg
Reference size*
40 x 40 cm
(16 x 16 inches)
Ottobock | 11