Ottobock 6A20 Gebrauchsanweisung Seite 7

Last update: 2015-05-06
• Please read this document carefully before using the product.
• Follow the safety instructions to avoid injuries and damage to the
product.
• Instruct the user in the proper and safe use of the product.
• Please keep this document in a safe place.
1 Application
The 6A20=30 Shuttle Lock Kit is to be used exclusively for the prosthetic
fitting of amputations of the lower limb. It is not suitable for being used in
bathing prostheses.
Field of application according to the Ottobock Mobility System MOBIS:
Approved for a patient with a weight of up to 100 kg / 220 lbs.
2 Description
The 6A20=30 Shuttle Lock Kit is used to connect the prosthetic socket of a
modular transtibial prosthesis to the socket liner at the distal end. A release
button on the locking mechanism can be used to unlock the 6Y13=3 Pin
from the shuttle housing.
For details about casting technique and incorporation of the Shuttle Lock
6A20=30 refer to the Technical Information 2.1.5 and 2.1.6.
Attention!
Please avoid exposing prosthetic components to corrosive ele-
ments such as fresh water, salt water, and acids. Using this medi-
cal product under such conditions will render all claims against
Otto Bock HealthCare null and void.
Please also inform your patients!
3 Components
The 6A20=30 Shuttle Lock Kit consists of 4R111=N Lamination Anchor (1),
6Y13=3 Pin (2), 5X440 Plaster Protection for Pin (3), 6A51=30 Shuttle Lock
English
Ottobock | 7