Remote Control Set Description - GRAUPNER mxs-8 Handbuch

mxs-8, mxs-12
HoTT (Hopping Telemetry T ransmission) is a synthesis
of know-how, engineering and global testing performed by
experienced model pilots. HoTT technology combines 2.4
GHz band transmission and reception with bi-directional
communications via a return channel integrated in the
receiver unit.
The remote control systems
HoTT have been especially designed for beginners. All
conventional model types with a maximum of four (six)
channels can nonetheless be readily operated with the
mxs-8 mxs-12
or
whether the model is a winged aircraft, helicopter, ship or
land vehicle.
Complex mixed-control functions are often required espe-
cially for the particular wing flaps used in winged models.
Thanks to computer technology it is possible to meet the
highly diverse model requirements.
mxs-8/mxs-12
The
system offers the highest level of safety and reliability.
The clear, straightforward program structure allows even
beginners to quickly become familiar with the various
functions.
This Graupner HoTT technology theoretically allows
over 200 models to be operated simultaneously. Ho-
wever, because only mixed radio-frequency operation is
permitted with certification for the 2.4 GHz ISM band, this
number is significantly lower in practice. Nevertheless, in
general more models can be operated simultaneously in
the 2.4 GHz band than would be the case in conventional
35 or 40 MHz frequency bands. As often the case previ-
ously, the real limiting factor is still likely to be the size of
available operating space (i.e. airspace for aircraft). The
fact alone that it is no longer necessary to coordinate
transmitting frequencies with other pilots in the vicinity
(which is sometimes quite difficult in broken landscapes,
such as on hillside slopes) represents an enormous boost
for safe operation.
An appendix is provided which contains additional infor-
mation about the HoTT system. At the end of the manual
you will find the conformity declaration and the guarantee
certificate for the transmitter.
Please observe the safety notices and technical notices.
Read the instructions carefully then test all functions
before use by simply attaching servos to the supplied
receiver. When doing this, please observe the correspon-
ding notice provided on page 16. This will help you learn
the essential operating steps and functions of the mxs-8/

Remote control set description

32
the Newest Generation of Remote Control Technology
mxs-8, mxs-12
HoTT system, regardless of
HoTT remote control
mxs-12 HoTT in the least amount of time.
Always handle your remote controlled model with a sense
of responsibility so that you do not endanger yourself or
others.
The Graupner team wishes you much fun and success
mxs-8/mxs-12
with your
system of the newest generation
HoTT remote control