Introduction; Product Description, General - Kessel Aqualift S XL Anleitung Für Einbau, Betrieb Und Wartung

1

Introduction

Dear Customer,
-
We are pleased that you have decided to buy one of our products. We are certain that it will fully meet your
requirements. We wish you smooth and successful installation.
In trying to keep our quality standard as high as possible, we rely on your help of course. Please let us know of
any possible improvements we could make to our product.
Do you have any questions? We look forward to hearing from you.
1.1

Product description, general

The KESSEL Aqualift S XL pumping station (referred to as „pumping
station" in this document) is designed to pump faecal-free wastewater.
The technical module <1> contains the pump(s) and the level
sensor(s). The assemblies are matched to the KESSEL control unit
supplied. The pumping station is delivered with different wastewater
pumps.
The sensors' switching signals for the wastewater level are processed
electronically in the control unit. Float switches or pressure sensors are
used as level sensors.
Pumping is activated when the fill volume has been reached. Pumping
is ended when the level has fallen again by an appropriate amount.
If two wastewater pumps are connected, they are switched on either
individually or together, depending on the fill volume and positioning of
the level sensors.
Different chamber modules <2> can be mounted on the technical
module <1>
. These two elements together form the pumping station.
2017/10
Introduction
28 / 148
2
1
Ill. [1]
010-993