Operation; Receiving The Dcf Radio Time Signal - Auriol Z31130 Bedienungs- Und Sicherheitshinweise

Operation

Receiving the DCF radio time signal

After a connection with the outdoor sensor is established or 3 minutes after the battery
safety strip is removed, the weather station automatically begins to search for the
DCF radio signal. The search is shown in the LC display by the radio tower symbol
flashing.
Note: In buildings made of reinforced concrete the reception of the radio signal
may be severely impaired (see "Setting up the devices").
In order to correct any deviations from the exact time, the clock is automatically
synchronised with the DCF radio signal every day at 1:00, 2:00 and 3:00.
Reception of the DCF radio signal can also be started manually on the weather station.
Press the + or – button
receive the DCF radio signal. This process takes several minutes and is indicated
in the LC display by a flashing radio tower symbol.
If the connection with the DCF radio signal cannot be established, the search is
stopped.
Note: If the clock of the weather station cannot receive the DCF radio signal due
to errors, too great a distance from the transmitter or similar reasons, it is possible
to set the time manually. If reception of the DCF signal is successful, the manual
settings are overwritten.
85059_aur_DCF-Wetterstation_Content_LB7.indd 19
, at the same time. The weather station attempts to
35 36
5
GB/CY 19
02.01.13 07:18