Hazard to nearby equipment.
Failure of important valve functions.
Hazard to the environment due to the
leakage of dangerous materials.
Prior to commissioning:
Read the installation, operating and
G
maintenance instructions.
Provide adequate training for the
G
installation and operating personnel.
Review the installation, operating and
G
maintenance instructions and verify
comprehension of the responsible
personnel.
Defi ne the areas of responsibility.
G
During operation:
Keep the installation, operating and
G
maintenance instructions available for
easy access.
Observe the safety information.
G
Use only in accordance with the
G
specifi cations.
Any servicing work and repairs not
G
explained in the installation, operating
and maintenance instructions must not
be performed without consulting the
manufacturer fi rst.
DANGER
Strictly observe the safety data sheets
or the safety regulations that are valid
for the media used.
In cases of uncertainty:
Consult the nearest GEMÜ sales offi ce.
2.2
Warning notes
Wherever possible, warning notes are
organised according to the following
scheme:
SIGNAL WORD
Type and source of the danger
® Possible consequences of non-
observance.
Measures for avoiding danger.
G
C50 HPW
Warning notes are always marked with a
signal word and sometimes also with a
symbol for the specific danger.
The following signal words and danger
levels are used:
Imminent danger!
® Non-observance will lead to death or
severe injury.
Potentially dangerous situation!
® Non-observance can cause death or
severe injury.
Potentially dangerous situation!
® Non-observance can cause moderate
to light injury.
CAUTION (WITHOUT SYMBOL)
Potentially dangerous situation!
® Non-observance can cause damage to
property.
2.3
Symbols used
Danger - hot surfaces!
Danger - corrosive materials!
Danger - bodily injury!
Hand: indicates general information
and recommendations.
Bullet point: indicates the tasks to
G
be performed.
Arrow: indicates the response(s) to
®
tasks.
Enumeration sign
26 / 48
DANGER
WARNING
CAUTION