Adjusting The Sensitivity - Siemens 5TC1 Series Bedien-Und Montageanleitung

Attention:
A power failure of more than 2 seconds deletes the stored
brightness level.
If a brightness of more than 80 lux is stored as threshold
value, the motion detector attachment ' Komfort' is in the daylight
mode and switches independent of brightness.

5.6 Adjusting the sensitivity

The motion detector attachment ' Komfort' has an internal pro-
gram enabling it to adapt automatically to ambient conditions.
Undesired switching is thus virtually excluded.
Fig. 20
The control (3) should normally be set to maximum sensitivity
(Fig. 20).
If necessary under exceptional circumstances, the sensitivity
can be changed manually.
To change the sensitivity of the motion detector attachment
' Komfort' , turn control (3) in the desired direction.
The internal program for the prevention of undesired switching
remains active, but the 'basic sensitivity' value is now another.
64