Herunterladen Diese Seite drucken

Conventional Pushbutton; Bouton-Poussoir Mécanique; Pulsador Mecánico - Siemens 5TC1 Series Bedien-Und Montageanleitung

Bewegungsmelder-aufsatz komfort
Vorschau ausblenden Andere Handbücher für 5TC1 Series:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The sensitivity of the motion detector attachment 'Komfort'
plugged into the extension insert can, if necessary, still be
adjusted with the corresponding control (see 'Settings', page
12 ff.).
Attention:
For the combination of a motion detector attachment 'Komfort'
with a motion detector extension insert, it should be noted
that a locking time of approx. 3 seconds must elapse after
shutoff of the lighting before the lamps can be switched on
again from the extension unit.

7.2 Conventional pushbutton

With conventional pushbuttons (n.o. contact), the motion
detector attachment 'Komfort' can be operated in the automatic
mode from several places.
When the lights are off, a brief press on the pushbutton
switches on the lighting independent of brightness.
Switching off is not possible.
74

Quicklinks ausblenden:

Werbung

loading