Safety Regulations - SEH ISD300 Kurzanleitung Zur Installation

Safety Regulations

Before starting the initial setup procedure and during the operation of the ISD,
please note the following safety regulations. Their purpose is to protect yourself
and others from personal injuries, and avoid damage to the equipment.
CAUTION: Failure to follow these directions could result in bodily harm
or loss of life.
Basic Personal Security Precautions
Read the documentation and make sure that your system meets the
requirements listed therein.
The ISD300 must only be connected to the mains and to the network by
qualified personnel.
Do not open the housing of the device. The ISD300 may only be connected and
operated if the housing is not opened and if the ISD300 is in perfect condition.
Do not put objects on top of the housing.
Unauthorised modifications to the device can affect the product certification
and are forbidden.
Operating Environment Prerequisites
The ISD300 must be placed on a solid surface with no vibration.
The ISD300 must not be operated in dusty places and direct sunlight.
Avoid contact with humidity or liquids.
The ISD300 may only be connected and operated if the installation location
meets the ambient conditions.
Ambient temperature:
Relative humidity:
Position the ISD300 in a way that guarantees that the socket for the
connection of the power cord is in the proximity of the device and is easily
accessible. Make sure that the device can be separated easily from the
network.
Quick Installation Guide
5 - 30 °Celsius
20 - 80 %
[en] 7