Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Press
to confirm. The display shows:
> Apply
< Back
10. Press
to confirm. The display shows:
Applying Network
Settings ...
The settings will be saved.
Assigning TCP/IP Parameters Automatically (DHCP)
Make sure that:
- An active DHCP server is integrated into the network.
Use the navigation keys at the front of the device to assign the TCP/IP
parameters via DHCP.
Proceed as follows:
1. Press
. The display shows:
IP Setup
Cancel
2. Press .
The display shows the current IP configuration ('Manual' or 'DHCP'):
IP Configuration
Manual
3. Select 'DHCP' via
> Apply
< Back
4. Press
to confirm.
The settings will be saved.
Upon booting DHCP will be applied automatically. TCP/IP parameters are assigned
by a DHCP server.
12
>
<
or
and press
[en]
to confirm. The display shows:
Quick Installation Guide
Werbung
Kapitel
Inhaltsverzeichnis
