SEH ISD300 Kurzanleitung Zur Installation Seite 8

Security Precautions for Cabeling and Power Cords
Make sure that no-one steps on or stumbles over the cables.
If the supplied power cord cannot be used in your country, acquire an
appropriate power cord that suits national provisions. For more information,
please consult your retailer.
A damaged power cord must be replaced immediately. For more information,
please consult your retailer.
The ISD300 must be connected to a socket with protective contact.
Do not connect a telephone cable to the RJ-45 connector. The RJ-45
connector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
Only use a certified USB Hi-Speed cable for the connection to the printer. You
will find a list of certified cables at www.usb.org!
Power Supply Provisions
This device may only be operated according to the power supply provisions
stated on the type plate.
line voltage / AC input:
100 - 240 V, 47 - 63 Hz, max. 0,25 A
This equipment is designed for connection to a grounded outlet. The
grounding type plug is an important safety feature. To reduce the risk of
electrical shock or damage to the equipment, do not disable this feature.
8 [en] Quick Installation Guide