Isd Quick Setup - SEH ISD300 Kurzanleitung Zur Installation

ISD Quick Setup

The 'Quick Setup' assists you with the initial configuration. The Quick Setup
involves four steps:
the configuration of the host name and device time,
the configuration of the TCP/IPv4 parameters and DNS server,
the search for available printers in the network, and
the setting up of queues.
Proceed as follows:
1. Start the ISD Control Center with the user profile 'Admin'.
2. Select QUICK SETUP.
3. Enter the host name and the device time.
4. Click Next.
5. Verify the TCP/IP parameters and change them, if required.
6. Click Next.
Quick Installation Guide [en] 15