Cochlear Baha BP100 Bedienungsanleitung Seite 13

Cleaning the sound processor
Clean the sound processor's housing with an
1
alcohol-free wipe. Do not use water to clean
your sound processor.
Brush the snap coupling clean using the soft
2
brush. Avoid using excessive cleaning force
on the snap coupling as this could damage
the processor. Your hearing care professional
can provide you with a special after care kit
to keep your Cochlear Baha BP100 in good
condition.
Remove the battery door and clean the slots
3
using the brush to ensure that the battery
door can slide smoothly on and off the sound
processor.
24
1 2
3
General processor care
Your Cochlear Baha BP100 sound processor is a
delicate electrical instrument. Follow these guidelines
to maintain its proper working order:
• If you will not be using your sound processor for any
length of time, remove the battery door and lift open
the battery hatch to let the sound processor
ventilate.
• If you will not be using the sound processor for a long
period, remove the battery.
• When not in use, turn off your sound processor and
store it free from dust and dirt.
• During physical activities, secure your sound processor
using the safety line. If the physical activity involves
contact, Cochlear recommends removing your sound
processor and protecting the abutment with an
abutment cover and a sweat band or similar.
• Remove your sound processor before applying hair
spray or gel. If using hair dye, remove the sound
processor and use the abutment cover.
Using Share the Experience
Family members and friends can "share the
experience" of bone conduction hearing. The test rod
is used by others to simulate hearing with the Cochlear
Baha BP100 sound processor.
To use the test rod:
Snap the sound processor onto the test rod using
1
the tilt technique. Hold the rod against the skull
bone behind an ear.
Plug both ears and introduce sound.
2
To avoid feedback (whistling), the sound processor
should not touch anything other than the test rod.
1 2
English
25