Cochlear Baha BP100 Bedienungsanleitung Seite 4

Key to symbols
Throughout the manual you will see small symbols.
Please refer to the list below for explanations:
"Consult instructions for use" or
"Consult operating instructions"
"Caution, consult accompanying
documents" or "Attention, see
instructions for use"
Audible signal
CE-mark
Temperature limitation
Interference risk
6
Date of manufacture
Batch Code
Serial Number
SN
Using your sound processor
The Cochlear Baha BP100 sound processor is
equipped with buttons for selecting different
listening programs and adjusting the volume level.
Audio and visual indicators can be activated to
alert you to the different settings and processor
status.
Your sound processor is programmed to be used
specifically on either the right side or the left
side of your head.
On/off and indicators
Turn on your sound processor by pressing and
holding down the middle button until the visual
indicator flashes 3 times. To turn off your sound
processor, press the middle button and hold it
down for 2 seconds.
If the sound processor is turned off and then turned
on again within 15 minutes, it returns to the last
used program and volume level.
If the sound processor is turned off for longer than
15 minutes, or if the battery is changed or removed,
it will return to the default program and volume
(as set by your hearing care professional) when it
is turned on again.
English
7