Materials Required For Assembly; Parts List; Tools And Aids - hanseatic SY-3502D-E5-C59-L52-600 Gebrauchsanleitung

Page EN-10

Materials required for assembly

Materials required for assembly

Parts list

(1) Exhaust hood
(2) Flue screen, 2-piece
(3) Exhaust air operation: Exhaust air hose
(4) Exhaust air operation: Check valve
(5) Wall mount for flue screen
(6) Retaining plate for flue screen
(7) Wall bracket for exhaust hood
(8) 4 screws 4.0 × 8 mm
(9) Cable ties

Tools and aids

– Screwdriver
– Drill with stone bit
– Measuring tape / ruler
– Level
– Pencil
– Stable stepladder
(1)
– A second person to help
(2)
Screws
The screws and dowels required to
mount the appliance on a wall are
not included in the package contents as
their type and dimensions will vary depend-
ing on the characteristics of the wall.
Please have a specialist advise you as to
(3)
which ones you need.
(4)
In total, you will need
– 2 round-head screws to attach the wall
(5)
bracket (5) for the upper flue screen (2)
– 3 countersunk screws to attach the wall
(6)
bracket (7) for the exhaust hood, ø 6 mm
(7)
maximum
(8)
– 2 round-head screws with flat washers to
secure the Exhaust hood, maximum ø 6
mm
(9)
– 7 suitable wall plugs