Care and maintenance
WARNING
Risk of injury!
Disconnect the mains plug before
■
cleaning the exhaust hood, changing
fi lters or replacing halogen bulbs. If
the mains plug is diffi cult to access,
switch off the corresponding fuse or
pull it out.
Cleaning the housing
WARNING
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent. Do not
use any sharp objects or scouring pow-
ders, as these can scratch the surface.
• Clean glass surfaces with a standard
glass cleaner.
Care and maintenance
Cleaning the grease filters
NOTICE
Risk of damage to property!
Handle the grease fi lters carefully to
■
avoid bending or creasing the fi ne
mesh.
Only reinsert the grease fi lters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 65 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding circuit.
2. Push down the lock on the grease filters
(12) and carefully remove the grease filter
downwards.
3. Wash the grease filters in a dishwasher or
in the sink like ordinary dishware.
Page EN-17
(12)
(12)