Setting The Time - hanseatic SY-3502D-E5-C59-L52-600 Gebrauchsanleitung

Page EN-16 Operation

Setting the time

1. If necessary, switch the device to standby
mode with the (18)
2. Press and hold the (14)
proximately 3 seconds.
The hour number on the display (16) will
flash.
3. Set the hours :
1)
The (15) button reduces the value.
The (17) button increases the value.
4. To save the displayed value, press the
(14) button 1×.
The minute number will flash.
5. Set the minutes 1) :
The (15) button reduces the value.
The (17) button increases the value.
6. To save the displayed time, press the(14)
button 1×.
The time is saved and the display returns
to normal mode.
If no button is pressed for 10 seconds
in the time mode, the electronics
assembly returns to normal mode.
If the respective button is held down for a
1)
longer time, the value will decrease/increase
quickly until the button is released.
button.
button for ap-
Timer
The fan time can be set from 1 to 60 minutes.
1. Press the (18) button to switch on the
fan.
2. If necessary, change the fan level with
the(17) button.
3. Press the (14) button.
TIMER and the last set running time
appear in the display window.
4. Set the desired fan time with the (15)
and (17) buttons :
1)
The (15) button reduces the value.
The (17) button increases the value.
5. When the desired fan time is set, press
the (14) button 1x. The display now
counts down the time to 0 minutes and
then switches the fan off.
6. To switch the fan off prematurely, press
the(18) button 1x.
If no button is pressed for 10 sec-
onds, the set fan time will start auto-
matically.
If the respective button is held down for a
1)
longer time, the value will decrease/increase
quickly until the button is released.