Denon AVC-A11SR Bedienungsanleitung Seite 31

Dolby Surround Pro Logic II mode
1
Select the function to which the component
you want to play is connected.
EX:
NPUT SELECTOR
(Main unit) (Remote control unit)
2
Select the Dolby Surround Pro Logic II mode.
Select the DOLBY The surround mode
II
PRO LOGIC mode switches when the
using the SELECT SURROUND MODE
buttons. button is pressed.
Select the DOLBY
PRO LOGIC II mode.
DOLBY / DTS
(Main unit) (Remote cont ol unit)
• The Dolby Pro Logic indicator lights.
Light
3
Play a program source with the
• For operating instructions, refer to the manuals of the respective components.
4
Select the surround parameter mode.
CINEMA
/ MUSIC
(Main unit) (Remote cont ol unit)
5
Select the optimum mode for the source.
CINEMA
TUN NG
/ MUSIC
BAN M
TUN NG
(Main unit) (Remote cont ol unit)
II DOLBY PL
DOLBY PL CINEMA
1 2 4, 5 6
4, 6
5
1
2
mark.
II MUSIC DOLBY PL II EMULATION
6
Set the surround parameters according to the mode.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
• The mode switches as shown below each time the button is pressed.
DOLBY PL II CINEMA DOLBY PL
7
Set the various surround parameters.
• CINEMA EQ setting
• PANORAMA/DIMENSION/CENTER WIDTH
setting
• DEFAULT setting
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
ENGLISH
II II
MUSIC DOLBY PL EMULATION
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
Surround parameters e
Pro Logic II Mode:
The Cinema mode is for use with stereo television
shows and all programs encoded Dolby Surround.
The Music mode is recommended as the standard
mode for autosound music systems (no video),
and is optional for A/V systems.
The Pro Logic Emulation mode offers the same
robust surround processing as original Pro Logic in
case the source contents is not of optimum quality.
Select one of the modes ("Cinema", "Music" or
"EML").
Panorama Control:
This mode extends the front stereo image to
include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either
towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be
heard only from the center speaker; only from the
left/right speakers as a phantom image; or from all
three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
31