Denon AVC-A11SR Bedienungsanleitung Seite 30

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround
(only with digital input)
1
Select the input source.
Playback with digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 15).
INPUT SELECTOR
(Main unit) (Remote control unit)
w Set the input mode to "AUTO".
NPUT MODE
(Main unit) (Remote control unit)
2
Select the Surround mode.
DOLBY / DTS
(Main unit) (Remote control unit)
3
Play a program source with the
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
DIGITAL
Light
sources.
• The DTS indicator lights when
Light
playing DTS sources.
• The SIGNAL DETECT indicator
lights when playing sources on
SIGNAL
DETECT
Light
which a special identification
signal is recorded.
4
Display the surround parameter menu.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
5 q Select the various parameters.
UNING
SURROUND
PARAMETER
BAND MODE
TUNING
(Main unit) (Remote cont ol unit)
30
1-q 3 3
1-w 2 4, 5, 6 5
4, 6
5
1-q
2
1-w
,
w Adjust the parameter settings.
SELECT
TUNING
BAND M E
TUNING
(Main unit) (Remote control unit)
6
Press the SURR.PARA. button to complete the setting.
When operation is by a main unit button, there will be a return to the regular display
several seconds after the operation is stopped.
(Remote control unit)
NOTES:
• The on-screen display (OSD) will differ for operation by main unit button and operation by remote control
button.
• When "Default" is selected and the F cursor button is pressed, "CINEMA EQ." and "D.COMP." are
automatically turned off, "SB CH OUT" is reset, "CHANNEL LEVEL" and the tone is set to the default
value.
Surround parameters w
CINEMA EQ. (Cinema Equalizer):
The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for
overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers
is too bright.
This function only works in the Dolby Pro Logic, Dolby Digital, DTS Surround and Wide Screen modes.
D.COMP. (Dynamic Range Compression):
Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud
sounds). For listening late at night, or whenever the maximum sound level is lower than usual, the Dynamic
Range Compression allows you to hear all of the sounds in the soundtrack (but with reduced dynamic range).
(This only works when playing program sources recorded in Dolby Digital or DTS.) Select one of the four
parameters ("OFF", "LOW", "MID" (middle) or "HI" (high)). Set to OFF for normal listening.
This parameter is displayed only when playing compatible sources in DTS mode.
LFE (Low frequency Effect):
This sets the level of the LFE (Low Frequency Effect) sounds included in the source when playing program
sources recorded in Dolby Digital or DTS.
If the sound produced from the subwoofer sounds distorted due to the LFE signals when playing Dolby Digital
or DTS sources when the peak limiter is turned off with the subwoofer peak limit level setting (system setup
menu), adjust the level as necessary.
Program source and adjustment range
1. Dolby Digital:–10 dB to 0 dB
2. DTS Surround:–10 dB to 0 dB
When DTS encoded movie software is played, it is recommended that the LFE LEVEL be set to 0
dB for correct DTS playback.
When DTS encoded music software is played, it is recommended that the LFE LEVEL be set to –10
dB for correct DTS playback.
TONE:
This adjusts the tone control. (See "Surround parameters r" on page 34.)
2 Dialogue Normalization
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level
(standard level) of the signals which are recorded at different levels for different program sources, such as DVD,
DTV and other future formats that will use Dolby Digital.
When this function is activated, the following message appears on the main unit's display:
DIAL.NORM
The number indicates the normalization level when the currently playing
OFFSET + 4dB
program is normalized to the standard level.