Denon AVC-A11SR Bedienungsanleitung Seite 21

4 Use the D and H cursor buttons to display
"RESET SYS" on the remote control unit, then
press the ENTER button.
• "SYS SEL" appears on the remote control
unit's display.
TUNING
ENTER / SH FT
BAND MODE
SELEC
TUNING
The remote control unit's display switches
as shown below each time the D and H
cursor buttons are pressed.
RESET PRE RESET LRN
RESET ALL RESET SYS
5 Press the D and H cursor buttons
TUNING
to select the system call setting
to be reset.
BAND MODE
TUNING
The remote control unit's display switches
as shown below each time the D and H
cursor buttons are pressed.
SYSCALL 1 SYSCALL 2
To reset CALL 1 or CALL 2,
ENTER / SH FT
select "SYS CALL 1" or SYS
SELEC
CALL 2", then press the ENTER
button.
6 "CONFIRM" is displayed. To reset the setting,
press the ENTER button while "CONFIRM" is
displayed.
• "COMPLETE" appears on the remote control
unit's display.
ENTER / SH FT
SELEC
(2) Resetting the preset memory
1
3, 4, 5
2, 3, 4, 6, 7
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "SET UP" appears on the remote control
unit's display.
ON /
OFF
SOURCE
2
Press the ENTER button.
ENTER / SH FT
SELEC
3
Use the D and H cursor buttons to display
"RESET" on the remote control unit, then press
the ENTER button.
TUNING
ENTER / SH FT
BAN MODE
SELEC
TUNIN
4 Use the D and H cursor buttons to display
"RESET PRE" on the remote control unit, then
press the ENTER button.
• After "SEL PRE" is displayed on the remote
control unit's display, the registered preset
memory is displayed on the remote control
unit's display.
TUNING
ENTER / SH FT
BAND MODE
SELEC
TUNING
5
Use the D and H cursor buttons
TUNING
to select the code to be reset.
BAND MODE
TUNING
6 When the mode you want to reset is shown on
the remote control unit's display, press the
ENTER button to reset the preset memory.
ENTER / SHIFT
SELEC
(3) Resetting "learned" buttons
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "SET UP" appears on the remote control
unit's display.
ON /
OFF
SOURCE
2
Press the ENTER button.
ENTER / SHIFT
SELEC
3 Use the D and H cursor buttons to display
"RESET" on the remote control unit's display,
then press the ENTER button.
• "RESET PRE" is displayed.
UNING
ENTER / SHIFT
BAND MODE
SELEC
TUNING
4 Use the D and H cursor buttons to display
"RESET LRN" on the remote control unit's
display, then press the ENTER button.
• "SEL DEVICE" is displayed.
TUNING
ENTER / SHIFT
BAND MODE
SELEC
TUNING
5 Use the D and H cursor buttons to select the
mode of the button to be reset, then press the
ENTER button.
UNING
ENTER / SHIFT
BAND MODE
SELEC
TUNING
ENGLISH
7 "CONFIRM" is displayed. To reset the preset
memory, press the ENTER button while
"CONFIRM" is displayed.
• "COMPLETE" appears on the remote control
unit's display.
ENTER / SHIFT
SELEC
1
3, 4, 5
2, 3, 4, 5, 6
6 "CONFIRM" is displayed. To reset
ENTER / SHIFT
the "learned" button for
SELEC
selected mode, press the ENTER
button while "CONFIRM"
displayed.
the
is
21