Product Description; Intended Use; Scope Of Delivery - Bosch TPA 200 Originalbetriebsanleitung

3.

Product Description

3.1

Intended use

The TPA 200 can be used to read and display
measurement data from tire pressure sensors
from all the usual manufacturers. Furthermore,
the tire pressure sensors of the vehicle can be
reconfigured and activated. When swapping
the tire pressure sensor, the measured data of
the uninstalled tire pressure sensors can be
copied and programmed on the new universal
tire pressure sensors. TPA 200 can activate tire
pressure sensors with 315 MHz (US vehicles)
and 433 MHz (EU vehicles), if these vehicles are
available in the database. The "TPA Startcenter"
software can save the measurement data from
the TPA 200 in a database, and this enables a
vehicle-specific test protocol to be created.
!
The TPA 200 is only to be used, when the
vehicle is stationary. The TPA 200 must not
come into contact with water or other liquids.
i
You can find the current car cover and the
TPA 200 supported tire pressure sensors on
the website
www.tpa.bosch-automotive.com
"Downloads >> TPA 200 / TPA Startcenter
Fahrzeugliste".
3.2 Prerequisites
The "TPA Startcenter" software must be in-
stalled on a PC/laptop with a Win Vista (32-bit),
Win 7 (32/64-bit) or Win 8 (32/64-bit) operating
system. The PC/laptop must have at least one
free USB port (USB 2.0 or USB 3.0). The USB
port is used for charging the internal storage
battery of the TPA 200, and it can also be used
for transferring the measured values and updat-
ing the TPA 200.
i
Simultaneous Bluetooth transmission with
TPA 200 is not possible for ESI[tronic] 2.0
users with Win XP SP3 or Win Vista. The "TPA
Startcenter" software must be installed on
another PC/laptop. Win Vista with ESI[tronic]
2.0 does not support the Microsoft Bluetooth
driver.
Robert Bosch GmbH
Product Description | TPA 200 | 21
3.3
The TPA 200 must be operated by specialist
personnel instructed in its use. We recommend
user training
maintenance of tire pressure sensors.
*) User training through AA Training Center
3.4
Designation
TPA 200
USB connecting cable
CD with TPA Startcenter software
Original operating instructions
3.5
3.5.1
, under:
Fig. 1:
1 LCD display
2 USB port (mini USB)
3 Selection keys
4 Function key
i
Training
in the testing, programming and
*)

Scope of delivery

Product description
TPA 200
TPA 200
The charging contacts on the back of the unit
are intended for a charging station (special ac-
cessory, currently not yet available).
1 689 989 200
en
Order number
–
1 684 465 683
1 687 005 103
1 689 989 200
1
2
3
4
|
2016-02-16