Initial Commissioning; Select Language - Bosch TPA 200 Originalbetriebsanleitung

4.

Initial Commissioning

4.1

Select language

1. Switch on the TPA 200.
 Main Menu
is displayed.

Check is displayed.
2. Select "Settings" with
with .
 General
is displayed.
3. Confirm with .
 Language
is displayed.
4. Confirm with .
 English
is displayed.
5. Select the desired language with
confirm with .
 The selected language is displayed.
6. Select "<Back" twice with
firm with to get into the main menu.
4.2 Installing TPA Startcenter
1. End all open applications.
2. Insert the CD with "TPA Startcenter" PC
software in the DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\SETUP.EXE' (D = letter for DVD
drive).
 Set-up is started.
5. Select <Install>
6. Heed and follow the instructions on the
screen.
"
Following successful installation the "TPA
Startcenter" application starts automatically.
i
If several users at one PC/laptop want to
read the saved measured values or save new
measured values, each individual user must
install the "TPA Startcenter" software.
Robert Bosch GmbH
Initial Commissioning | TPA 200 | 23
or and confirm
or and
or and con-
4.3 TPA 200 Registration
We recommend registering TPA 200 on the TPA
website. Registering has the following benefits:
R
Free update for the first three months (after
which payment is required)
R
Overview of the current TPMS coverage
R
Access to FAQs and instructions
i
The serial number is required to register
TPA 200. It may take up to 24 hours before
you receive confirmation by e-mail.
¶
Logon to the TPA website
automotive.com
, and follow the instructions
for registration.
4.4 TPA 200 update
After TPA 200 is registered, the software can
be updated. Updates are available on the TPA
website.
1. Logon to the TPA website
automotive.com
.
2. Update the software if a new update is avail-
able.
i
Additional information on updating TPA 200
can be found in the online help for the TPA
Startcenter.
1 689 989 200
en
www.tpa.bosch-
www.tpa.bosch-
|
2016-02-16