Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English – 2
NOTICE: Changes or modifications made to this equipment
not expressly approved by the Robert Bosch GmbH may void
the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a res-
idential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful in-
terference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the follow-
ing measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and re-
ceiver.
– Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
CAN ICES3(B)/NMB3(B)
Responsible Party for North-America:
Bosch eBike Systems Americas
Robert Bosch LLC
27211 Burbank, Foothill Ranch, CA 92610, USA,
www.bosch-ebike.com/us/
Product Description and
Specifications
Intended Use
The capacity tester is not designed for testing Bosch eBike
batteries while fitted in the eBike. The capacity tester is an
extra diagnostic aid for Bosch eBike batteries and consti-
tutes a useful addition to the Bosch eBike DiagnosticTool.
The capacity tester is designed to test the energy content of
Bosch eBike batteries.
It does not test the functionality or the technical condition of
the Bosch eBike battery.
In addition to the functions shown here, changes to software
relating to troubleshooting and functional modifications may
be introduced at any time.
Product Features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
(1) Capacity tester
(2) 12 V power supply
(3) USB cable
(4) Port for power supply
0 275 007 CT1 | (24.08.2020)
(5) Status indicator
(6) Connection cable
(7) Adaptor for connecting Classic+ Bosch eBike batteries
(blue)
(8) Standard battery
(9) Computer with eBike DiagnosticTool
Indicators on the capacity tester
(a)
Ready LED indicator
(b)
Running LED indicator
(c)
Finished LED indicator
Technical Data
Capacity tester
Input voltage
Input current
USB port
A)B)C)
Operating temperature
Storage temperature
Measuring system measuring
D)
tolerance
Maximum discharge current
Weight, approx.
Protection rating
Dimensions (length × width ×
height)
A) Ideally at a room temperature of 20 °C
B) Can be operated at altitudes of no more than 2000 m above sea
level
C) Relative humidity max. 80 % at 31 °C
D) The value given represents the maximum difference between
the measured energy content and the actual energy content of
the battery. The measuring system consists of the capacity
tester, battery and charger. The value given represents the total
of all tolerances.
The Bosch eBike system uses FreeRTOS
(see http://www.freertos.org).
Power supply
Article number
Input voltage
Frequency
Maximum input current
Output voltage
Output current
Weight, approx.
Protection class
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your capacity tester.
Please take note of these symbols and their meaning. Know-
BCT 100
V=
12
mA
2000
2.0
°C
+15 to +40
°C
+10 to +40
±5 %
A
6
kg
2.1
IP30
mm
242 × 193 ×
133
1 270 015 626
V~
100–240
Hz
50–60
mA
700
V=
12
mA
2000
kg
0.2
/Ⅱ
Bosch eBike Systems
Werbung
Inhaltsverzeichnis
